The new tensocrom is a solution of pigments dissolved in a special medium which allows to apply different glazes over the base color of the model in order to shade it, to dirty it, to make it old, to enhance the details or to make it chromatically uneven. The new tensocrom can be applied over the painted models with any kind of color. Its use is simple and effective. It can be applied both with brush and airbrush. With brush. Way 1 Moisten brush in the tensocrom and discharge part of the product on a clean cloth. Apply glaze on the surface . For a good result glazes must bealmost transparent. Applying more than one glaze on the same area soft and degrading shades are obtained. Glazes dry very fast. Way 2 Moisten brush in the tensocrom and apply small spots on the surface around the relief details or in the interstices of the panel etc. Let dry. To enhance more the effect repeat procedure. Clean brushes with water after use. With airbrush. Tensocrom can be sprayed with airbrush both pure and diluted with water. For best results it is advisable to adjust air pressure to the minimum and to carefully wash airbrush after use by spraying clean water. The choice of chromes to be used is personal and it is possible to modify them with Lifecolor colors. Pot TSC 201 contains a pure medium which can be mixed at will with any Lifecolor to obtain the desired shade.