Home > By Manufacturer > Sprue Brothers Models Private Label Products >

SBMBSI209 SB Models Finish-Cure Epoxy Glue 20 min 4.5oz
SBMBSI209 SB Models Finish-Cure Epoxy Glue 20 min 4.5oz

Our Price: $7.99
Scale: Not Applicable

Stock Status:In Stock
Product Code: SBMBSI209


FINISH-CUREƒ?› 20 min.epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint.

FINISH-CUREƒ?› can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CUREƒ?› should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CUREƒ?›. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth.

FINISH-CUREƒ?› is best mixed in a disposable cup.